Fusionadora INNO M7

Categoría: Etiquetas: , ,
Model M7
Dimension 124H x 144W x 131D (including rubber bumper)
Weight 1.56kg (including battery) / 1.31kg (without battery)
Number of Fiber Single
Applicable Fibers SM(ITU-T G.652&T G.657) / MM(ITU-T G.651) / DS(ITU- T G.653) / NZDS(ITU-T G.655)
Compatible Fiber / Cable 0.25~3.0 mm / indoor Cable
Cleaved Length 10 – 16 mm
Cladding Diameter 80 μm – 150 μm
Splicing Mode Max 100 modes, preset 9 modes
Heating Mode Max 30 modes, preset 3 modes
Typical Splice Loss 0.03dB(SM) / 0.01 dB(MM) / 0.05dB(DS) / 0.05dB(NZDS) / 0.03dB(G.657)
Measured by cut-back method relevant to ITU-T standards.
Return Loss >> 60dB
Lighting 2 White LEDs
Splicing Time Quick mode: 7sec (Avg.) / Typical: 9 sec (Avg.)
Estimated Splice Loss Available
Heating Sleeve Length 20 mm – 60 mm
Heating Time 13 sec (45mm, slim 60mm), 15 sec (60mm)
Results Storage Last 10,000 records
Tention Test 1.96~2.25N
Operating Condition Altitude 0~5000m above sea level, Humidity 0~95%RH, -10~50°C, Wind 15m/s
Storage Condition 0~95% relative humidity, -40~80°C
Display 90° bi-directional view, 4.3” Color High Resolution Display
Fiber View & Magnifiation 300X magnifiation with 3 display modes, 400X partial magnifiation
Power Supply AC Input 100-240V, DC Input 9-14V
No. of Splice / Heating with Battery Typical usage: 130 cycles / Power save usage: 200 cycles
Operating Methods Button / Touch Screen
Automatic Calibration Automatic arc calibration by air pressure and temperature
Electrode Life 5500 arcs, can be extended by using an electrode grinder
Terminal USB Type-C
Durability tests Shock resistance : Drop from 76cm
(No guarantee the product will not be damaged Dust resistance : Test in the dust chamber for 8 hours (IP5X)
by these conditions.) Water resistance : Dripping water when tilted up to 15° (IPX2)